Filter
Top Products
109
Projector Monitoring and Control using a NetworkProjector Monitoring and Control using a Network
PROCEDURE
With Windows running, click [Start], point to
[Programs] (or [All Programs]), point to [EPSON
Projector] and then click [EMP Monitor].
EMP Monitor will start up.
If EMP Monitor is being started up for the first time
after it was installed, or if you would like to register
additional projectors, click the [Register projector]
icon. If all projectors are already registered and you
do not want to add any new projectors, skip to step 8.
Click [Auto detect].
The names of all projectors that are currently connected to the
network will be displayed in a list.
1
2
3
TIP
If you know the IP address of the projector that you would like to
register, the Manual registration function is a handy way to register
the projector. Click [Manual registration] to display the Manually
register projector window. Enter the IP address and then click
[Confirm]. If the Projector name appears, click [Add]. The Projector
name will then be added to the list in the Register projector window.