Filter
Top Products
132
MaintenanceMaintenance
Replacing Consumables
This section describes how to replace the lamp and the air filters.
It is time to replace the lamp when:
• The message "Lamp Replace." appears on the screen when
projection starts
.
• The indicator is flashing orange
• The projected images get darker or start to deteriorate in quality.
Lamp Replacement Period
A message will be displayed.
Flashes orange
TIP
• The lamp replacement message is set to appear after the following
periods of time in order to maintain the initial brightness and quality
of the projected images.
EMP-9300: Approx. 6900 hours
EMP-8300:
·With continuous use at high brightness: Approx. 1900 hours
·With continuous use at low brightness: Approx. 2900 hours
"Brightness Control" p.92
If you continue to use the lamp after this period, the possibility of the
lamp breaking becomes greater. When the lamp replacement
message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
• Depending on the characteristics of the lamp and on the way it has
been used, the lamp may become darker or stop working before the
lamp warning message appears. You should always have a spare
lamp ready in case it is needed.
• Contact your dealer for a spare lamp.