Filter
Top Products
111
Projector Monitoring and Control using a NetworkProjector Monitoring and Control using a Network
The statuses of the registered projectors will each be
displayed.
Once a projector has been registered, the status of the projector
will be displayed automatically each time EMP Monitor is
started from then on.
The following table shows the display details.
Status :
The projector statuses are indicated by means of the following
icons.
Power ON with no problems
Power OFF with no problems
Power ON with a problem
Power OFF with a problem
Network error (not connected to network, power cable is
not connected, etc.)
Name : Shows the name of the projector.
8
Video Source :
Shows the currently selected input port.
Computer 1
Computer 2
BNC
S-Video
Video
DVI
Error data :
If an error occurs with the projector, the status is indicated
by means of the following icons.
Lamp replacement
notification
Replace the lamp with a new one.
p.133
High-speed
cooling in progress
"Reading the Indicators" p.116
Lamp cover open
error
High internal
temperature
Internal problem
Fan related error
Sensor error