Filter
Top Products
30
Playing Sound from the Video Equipment
The projector has a built-in speaker with a maximum output of 7 W. You
can output sound from the connected video equipment (such as a computer
or video deck) through the projector's built-in speaker if the video
equipment has an audio output port.
The [Audio] port to use is the port that is in the same box as the port being
used to input the video signals.
The audio cable to use for the connection can be either of the following,
depending on the shape of the [Audio] port.
• If the image signals are being input to the [DVI ], [Computer 1] or
[Computer 2] port, use the accessory audio cable.
• If the video signals are being input to the [BNC], [S-Video] or [Video]
port, use a commercially-available RCA audio cable.
If the image signals are being input to the [Computer 1] port
* An accessory audio cable is not supplied with the EMP-9300. Use a
commePrcially-available audio cable instead.
TIP
• You can adjust the volume after projection has started. p.61
• If using a commercially-available 2RCA (L/R)/stereo mini-jack
audio cable, use one that is marked as "No resistance".
To audio output port
To [Audio] port
Audio cable
(accessory)