Filter
Top Products
134
MaintenanceMaintenance
Take out the old lamp.
Fold out the handle as shown in the illustration below and pull
the lamp straight out of the projector while supporting it with
one hand so that it does not drop.
If the lamp is broken, replace it with a new lamp, or contact
your local dealer for further advice. If replacing the lamp
yourself, be careful to avoid pieces of broken glass.
Install the new lamp.
Hold the lamp so that it faces the correct way to fit into the
projector, insert the lamp until it clicks into place, and then fold
down the handle and secure it by engaging the tab.
Tighten the three lamp fixing screws.
Install the lamp cover.
Insert the cover tab at the top of the lamp cover into the
projector, and then install the lamp cover and tighten the two
lamp cover fixing screws.
4
2
1
5
1
2
Tab
6
7