Filter
Top Products
29
Connecting to a Video Source
Use a commercially-available RGB video cable to make the connections.
If the RGB Output Ports are the 3BNC Ports
To RGB output ports
RGB video cable
(commercially-available)
To [BNC] ports
red
green
blue
TIP
• After projection starts, change the "BNC Input" setting in the
"Setting" menu to "RGB-Video". p.86
• If more than one external component is connected to the projector,
press the [BNC] button on the remote control after projection starts,
or repeatedly press the [Video/BNC] button on the projector's control
panel until "BNC (RGB-Video)" is displayed on the projected image
to select the signal to be projected. p.43