Filter
Top Products
112
Projector Monitoring and Control using a NetworkProjector Monitoring and Control using a Network
The power for all registered projectors can be turned
on and off at the same time, and the input signal for
all projectors can also be selected at the same time.
Select the projectors for which the operation is to be
carried out and then click the desired operation
button.
If you would like to select all projectors, click [Select All].
Furthermore, you can also use the same operations as selecting
files in Windows to select ranges of projectors; for example,
click the first projector in the range, and then while pressing
down the [Shift] key on the keyboard, click the last projector in
the range to select all projectors within the specified range. If
you hold down the [Ctrl] key, projectors can be selected and
unselected each time the projector name is clicked.
The following table shows the function of each button.
To close EMP Monitor, select [Exit] from the [File]
menu, or click [ ] in the top-right corner of the
window.
[View details] button
Shows the detailed information for the selected
projectors.
Power ON
Turns the power on for the selected projectors.
Power OFF
Turns the power off for the selected projectors.
Computer 1
Changes the input source to the [Computer 1] port.
Computer 2
Changes the input source to the [Computer 2] port.
BNC
Changes the input source to the [BNC] port.
S-Video
Changes the input source to the [S-Video] port.
Video
Changes the input source to the [Video] port.
DVI
Changes the input source to the [DVI] port.
9
10