Filter
Top Products
107
Projector Monitoring and Control using a NetworkProjector Monitoring and Control using a Network
If the name of the projector that you would like to set up mail notification
for does not appear in the window, use the following procedure to
manually connect the projector.
PROCEDURE
Start EMP NetworkManager.
Double-click [Projector address selection] in the
projector list display area.
The following IP Address Setup window will be
displayed.
You should make the following settings when manually
connecting a projector.
Connecting Manually
1
Projector
address...
EMP482800...
192.168.0.8
PROJECTOR01
169.254.10.176
PROJECTOR02
169.254.10.177
PROJECTOR03
169.254.10.178
Room201
169.254.207.64
Room202
169.254.207.65
Room301
169.254.207.66
Room302
169.254.207.67
Room303
169.254.207.68
Room401
169.254.207.69
2
IP address Enter the IP address for the projector to be connected.
[Add] button
Adds the projector with the specified IP address to the
projector list display area. The window closes when
this button is clicked.
[Connect] button
Connects the projector with the specified IP address
to the network. The window closes when this button
is clicked.
[Cancel] button Cancels entry of the IP address.
3