Filter
Top Products
110
Projector Monitoring and Control using a NetworkProjector Monitoring and Control using a Network
Select the projector to be monitored or controlled and
then click [Add].
If there are other projectors that you would like to
monitor that need to be added, repeat step 4.
Once all new projectors to be monitored have been
added, click [Close].
The display will return to the Register projector window, and
the names of the added projectors will appear in the projector
list.
Once all target projectors have been registered, click
[Close].
If there are any projectors in the list that you do not need to
monitor, select the Projector name and then click [Delete].
4
Selected projector name
5
6
: Projectors registered using the Manual registration function
: Projectors registered using the Auto detect function
7
TIP
If the IP addresses for projectors that have been registered using the
Manual registration function have changed, you can select the
Projector name and then click [Edit] to change the IP address. [Edit]
cannot be used for projectors that have been registered using the Auto
detect function.