Filter
Top Products
120
Problem SolvingProblem Solving
When the Indicators Provide No Help
First refer to the following problems to determine what type of problem it is that you are having, and then refer to the page containing details of the problem.
No images appear p.121
Projection does not start, the projection area is completely black, the
projection area is completely blue, etc.
Projection stops automatically p.121
The message "Not Supported." is displayed. p.122
The message "No Signal." is displayed. p.122
Images are fuzzy or out of focus. p.123
Interference or distortion appear in images. p.123
Problems such as interference, distortion or black & white checked
patterns appear.
Image is truncated (large) or small p.124
Only part of the image is displayed.
Image colours are not right p.125
The whole image appears purplish or greenish, images are black &
white, colours appear dull, etc.
(Computer monitors and LCD screens have different colour
reproduction performance, so that the colours projected by the
projector and the colours appearing on the monitor may not
necessarily match, but this is not a sign of a problem.)
Images are too dark or too light p.126
Problems relating to images
Mail notification messages are not
being sent when a problem occurs
with the projector.
p.126
The projector cannot be
monitored and controlled using
the EMP Monitor function.
p.127
No sound can be heard or the
sound is faint p.127
The remote control does not work
p.128
Problems relating to monitoring and
controlling projectors using a network
Other problems