Filter
Top Products
21
Connecting to a Computer
Either of the following two connection methods can be used depending on
the connection ports or the type of cable being used.
• Use the optional VGA-HD15/BNC PC cable to connect the monitor ports
of the computer to the [Computer 1] port at the rear of the projector.
See "Appendices: Optional Accessories" p.141
• Use a commercially-available 5BNC monitor cable (5BNC/male-male)
to connect the monitor ports of the computer to the [BNC] port at the rear
of the projector.
If connecting to the [Computer 1] port
If the Monitor Ports are the 5BNC Ports
VGA-HD15/BNC PC cable
(optional)
To monitor ports
To [Computer 1] or
[Computer 2] port (blue)
TIP
• After projection starts, change the "Computer1 Input" or
"Computer2 Input" setting in the "Setting" menu to
"Analog-RGB". p.86
• If more than one external component is connected to the projector,
press the [Comp1] or [Comp2] button on the remote control after
projection starts, or repeatedly press the [Computer/DVI] button on
the projector's control panel to select the signal to be projected.
p.43