Filter
Top Products
89
Using the Configuration Menu FunctionsUsing the Configuration Menu Functions
"Advanced1" Menu
Standby Mode
:
Startup Screen ON OFF
:
Video
Audio
Setting
User's Logo
Advanced1
About
Reset All
Progressive
Color Adjustment
Color Temp. RGB
Rear Proj.
Language Select [English]
Reset
Execute
Adjust
ON OFF
OFF
:
:
:
Ceiling ON OFF
:
[Menu]: Exit[ ]: Enter[ ]: Select
Effect
Advanced2
Black Level
White Level
+
-
+
-
0
0
Network ON Network OFF
:
:
Video Film/Auto
Sub-menu Function Default
Startup
Screen
Sets whether the startup screen is displayed or not.
To change the user's logo, you need to record your own
logo. p.138
When this setting is changed, turn the power off, and when
the cool-down period has finished, turn the power back on
again. The new setting will be applied after the power turns
back on.
•With the EMP-9300, this cannot be changed between
enabled ("ON") and disabled ("OFF") if the "User's Logo
Protect" function of Password Protect has been set to
"ON". Cancel the Password Protect function before
changing this setting. p.38
ON
Progressive
(Setting is only possible when composite video, S-Video or
component video (525i, 625i) signals are being input)
Converts interlaced (i) signals to progressive (p) signals.
When set to "OFF", interlaced signals are projected without
conversion.
•OFF : IP conversion is carried out for each field
window. This is ideal for images with a lot of
movement.
•Video : The film judgment function is turned off.
•Film/Auto : This setting is for normal use. The source is
automatically judged to be a video source or
not, and if it is a video source, the 3-2 pull-
down function operates and the images are
reproduced as film images with no loss in
colour from the original.
Film/Auto