Filter
Top Products
138
Saving a User's Logo
You can record the image that is currently being projected as a user's logo.
PROCEDURE
Project the image that you would like to use as a
user's logo, and then press the [Menu] button on
either the remote control or the projector's control
panel.
Select the "User's Logo" menu, and then press the
[Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel.
Select "Yes" in the sub-menu, and then press the
[Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel.
TIP
When a user's logo is recorded, the previous user's logo will be
erased.
1
2
[ ]: Select
Execute
Video
Audio
Effect
User's Logo
Advanced1
About
Reset All
[ ]: Execute [Menu]: Exit
[ ]: Select
Setting
Advanced2
TIP
• With the EMP-9300, a user's logo cannot be recorded if the "User's
Logo Protect" function of Password Protect has been set to "ON".
Cancel the Password Protect function before recording a user's logo.
p.38
• If keystone correction or the E-Zoom function have been used, they
will be cancelled when the "User's Logo" menu is selected.
3
Accept the present image as user's logo?
User's Logo
YES
NO
TIP
When you press the [Enter] button on the remote control or the [Auto/
Enter] button on the projector's control panel, the images will be
projected at their original image signal resolution, so that when you
are projecting images which have a resolution that is different from
the number of pixels on the projector's panel, and when you are
projecting video images, the display size will change.