Epson EMP-9300 Projector User Manual


 
72
Functions for Enhancing ProjectionFunctions for Enhancing Projection
If the input resolution is lower than the panel resolution (EMP-
9300:1400 × 1050, EMP-8300:1024 × 768)
If the input resolution is higher than the panel resolution
(EMP-
9300:1400 × 1050, EMP-8300:1024 × 768)
Resized display Real display
The image is projected in the
middle of the screen at the original
input signal resolution.
Resized display Real display
The middle section of the image is
projected. You can tilt the [ ]
button on the remote control to
scroll around the image.
TIP
• The display methods for projected images are stored individually for
each video source.
• If the input resolution is the same as the panel resolution, the image
size will not change.
• In the case of SXGA (5:4) input signals, the image position changes
as shown below each time you press the [Resize] button while
holding down the [Shift] button on the projector's control panel.
Resized display (5:4) Aligned to left (5:4)
Resized display (4:3)
Aligned to right (5:4)