Filter
Top Products
20
Connecting to a Computer
Some workstation-type computers have a 13w3 monitor port.
In such cases, use a commercially-available 13w3 ⇔ D-Sub 15-pin cable
to make the connection.
If the Monitor Port is a 13w3 Port
To monitor port
13w3 cable
(commercially-available)
To [Computer 1] or
[Computer 2] port (blue)
TIP
• After projection starts, change the "Computer1 Input" or
"Computer2 Input" setting in the "Setting" menu to
"Analog-RGB". p.86
• If more than one external component is connected to the projector,
press the [Comp1] or [Comp2] button on the remote control after
projection starts, or repeatedly press the [Computer/DVI] button on
the projector's control panel to select the signal to be projected.
p.43
• Some workstations may require a special cable. Consult the
workstation manufacturer for further details.