Filter
Top Products
27
Connecting to a Video Source
Projecting S-Video Images
Use a commercially-available S-Video cable to make the connections.
Projecting Component Video Images
Use a commercially-available component video cable and three
conversion adapters to make the connections.
S-Video cable
(commercially-available)
To [S-Video] port
To S-Video output port
TIP
If more than one external component is connected to the projector,
press the [S-Video] button on the remote control after projection
starts, or repeatedly press the [Video/BNC] button on the projector's
control panel until "S-Video" is displayed on the projected image to
select the signal to be projected. p.43
Component video cable
(commercially-available)
To component video
output ports
To [BNC] ports
Adapters
(commercially-
available)
red
green
blue