Filter
Top Products
108
Projector Monitoring and Control using a NetworkProjector Monitoring and Control using a Network
A projector list that has already been recorded by EMP Monitor can also
be shared by EMP NetworkManager.
PROCEDURE
Start EMP NetworkManager.
The projectors that have been recorded will be
displayed in the projector list display area.
Click [Import].
The file selection window will be displayed.
Select the registration file for EMP Monitor and then click
[Open]. A list of the projectors that have been registered by
EMP Monitor will be displayed in the projector list display
area.
Centralised Monitoring and Controlling of Projectors
(EMP Monitor)
EMP Monitor can be used to check the statuses of multiple projectors that
are connected to the network and to carry out operations such as turning
the power for the projectors on and off and changing the signal sources, all
using a single computer. If there are several projectors that have been set
up in different classrooms or meeting rooms, for instance, they can all be
started at once and monitored by a single operator.
Check the following points before starting up EMP Monitor.
• EMP Monitor must be installed in the computer to be used for monitoring
and control. p.100
• The computer and the projectors must be connected to the network.
• If using Windows 2000/NT4.0/XP, the computer must be started up by a
user who is logged in as Administrator.
Sharing EMP Monitor settings
1
2
Projector
address...
EMP482800...
192.168.0.8
PROJECTOR01
169.254.10.176
PROJECTOR02
169.254.10.177
PROJECTOR03
169.254.10.178
Room201
169.254.207.64
Room202
169.254.207.65
Room301
169.254.207.66
Room302
169.254.207.67
Room303
169.254.207.68
Room401
169.254.207.69
Indicates a projector that
has been found using
automatic search
Indicates a projector that
has been registered using
EMP Monitor
Indicates a projector that has
been registered by specifying
the IP address
manually.
3
TIP
• A maximum of 64 projectors can be monitored and operated all at
once in this way.
• If "Standby Mode" in the projector's "Advanced1" menu is set to
"Network ON", EMP Monitor can be used to carry out network
monitoring and control functions even when the projector is in
standby mode (when the projector's power is turned off).