Filter
Top Products
1
You can upgrade your printer by installing additional memory or optional
interfaces. This chapter provides instructions for the following:
• Installing memory modules
• Installing an interface card
Installing Memory Modules
Additional memory will allow you to print more complex pages with more
fonts and larger graphics. Two slots are available in the printer for installing
dual in-line memory modules, or DIMMs.
DIMMs are available from many vendors. They must meet the following
requirements to work in your printer:
Normally the memory you install is added to the printer’s internal memory
(at least 128MB). However, the printer can only use a maximum of 256MB.
Even if you install two 128MB modules, only 256MB will be available.
Appendix A:
Installing
Options
Memory module requirements
DRAM Synchronous Dynamic RAM Double In-line Memory Module
(SD RAM DIMM)
Capacity 32MB, 64MB, or 128MB
Type 168-pin type, 64 bit, with SPD
Access speed 66.66 MHz or higher (15 ns or less)
Height Less than 40 mm