Filter
Top Products
4-6
4-6 | Maintaining and Transporting the Printer
3. Turn the cartridge clockwise 90 degrees, pushing it the rest of the way
into the slot.
4. If you need to replace another cartridge, repeat the procedure, starting
with step 3 on page 4-3.
5. Close the front cover.
Be sure to check the control panel display after you replace a cartridge. You
may see a message indicating that one of the other parts needs replacing. The
messages appear one at a time, even if several consumable parts run out at
the same time.
Replacing the Fuser Oil Roll
When you see one of the following messages on the control panel display, it’s
time to replace the fuser oil roll:
• Oil Roll Near Empty
• Replace Oil Roll
When you see the
Oil Roll Near Empty
message, you can press
Continue
to
print. Make sure you have a replacement oil roll (part number S052002).
You will only be able to print for a short time before the
Replace Oil Roll
message will appear, and the printer will stop.
Caution
Make sure you turn the
cartridge all the way, as
shown in the illustration.
Otherwise, toner may
leak.