Filter
Top Products
2-8
2-8 | Monitoring the Printer
Fuser Unit Open
The fuser unit on the left side of the
printer is pulled out.
Push in the fuser unit.
Illegal Aux I/F
Card
The printer can’t communicate with the
installed optional interface card.
Turn off the printer and remove
the card. Then try reinstalling the
card.
Illegal DIMM A
The printer can’t read the installed
optional DIMM (memory module).
Turn off the printer and remove
the memory module.
page A-2
Insert
<paper
source>
The specified cassette is pulled out. Push in the paper cassette.
Insert Oil Roll
The fuser oil roll is not installed. Install the fuser oil roll. page 4-6
Insert
Photocondctr
The photoconductor unit is not installed,
or is installed incorrectly.
Turn off the printer, then install or
reinstall the photoconductor unit.
page 4-10
Insert Waste T
Box
The waste toner collector is not installed
or is installed incorrectly.
Install or reinstall the waste toner
collector.
page 4-15
Irregular Density
Print density is too high. To avoid
damage, the printer stops and paper
jams.
Clear any jammed paper from the
multipurpose tray or paper path.
Try printing with different settings
to lower print density.
page 5-6
Manual Feed
<paper source>
<paper size>
Printer is waiting for paper to be inserted
or for the Continue button to be
pressed.
Make sure paper is loaded, and
then press the Continue button to
print the page.
page 1-8
Mem Overflow
The printer doesn’t have enough
memory available for the current print
job.
Press the Continue button to
clear the error message. If the
message remains, reset the
printer by holding down the Alt
and Reset buttons until Reset
appears on the display.
If you see the same message
when you try printing again, you
will need to reduce the number or
size of graphics or fonts, lower the
resolution, or add memory to your
printer.
page A-2
Paper Jam
Paper is jammed near or inside the fuser
unit.
Clear jammed paper from the
fuser unit area.
page 5-9
Paper Out
<paper source>
<paper size>
There is no paper in the specified paper
source.
Load the specified paper in the
paper source.
page 1-5
page 1-8
Error messages (continued)
Message Explanation Response See