Filter
Top Products
4-15
Maintaining and Transporting the Printer | 4-15
Replacing the Waste Toner Collector
The waste toner collector is replaced whenever you replace the
photoconductor unit. If you see one of the following messages on the control
panel display, you should also replace the collector (even if the
photoconductor doesn’t need replacing):
• Waste T Box Nearfull
• Replace Waste T Box
When you see the
Waste T Box Nearfull
message, you can press
Continue
to print. Make sure you have a replacement waste toner collector (part
number S050020). You will only be able to print for a short time before the
Replace Waste T Box
message will appear, and the printer will stop.
Follow these steps to replace the waste toner collector:
1. Open the front cover.
2. Squeeze the handle and tab of the waste toner collector to release the
lock.
Caution
Do not reuse toner found
in the waste toner
collector.