Filter
Top Products
2-2
2-2 | Monitoring the Printer
Monitoring Normal Printer Operation
Messages appear on the control panel display and lights come on or flash to
indicate various phases of printer operation. The following table explains the
messages and lights:
Message Light Explanation or response
Warming up
(flashing)
On Line on Printer is warming up.
Ready
On Line on Printer is operating normally.
Ready
On line on,
Form Feed flashing
Printer is processing print job.
Ready
On Line on,
Form Feed on
Printer has data in its buffer.
Press the On Line button to eject
the page.
Reset or Reset All
On Line off,
Form Feed flashing
Printer is resetting and clearing its
buffer.
Reset to Save
On Line off Press the On Line button to print
and save new settings.
Regulating Printer
On Line on
Form Feed flashing
Printer is performing internal
adjustment.
Standby Level 1
or 2
On Line on Printer is in first or second level of
power-saving mode.
Warning message
(see page 2-10 for
list)
On Line off,
Form Feed flashing
Continue flashing
Check the message and press
the Continue button to print.
Error message (see
page 2-7 for list)
On Line off,
Form Feed flashing
Check the error message, correct
the error to continue printing.
Service Req
<error
number
>
All lights on Turn off the printer, wait
10 seconds, and turn it back on. If
the message remains, turn off
the printer and contact IKON as
described in the Introduction.