Filter
Top Products
1-12
1-12 | Handling Paper
3. Set up the print job in your application. Before you print, make sure you
select the following options in your printer properties or print dialog
box:
•
Media Type:
Transparency
•
Output Tray:
FaceUp Tray
When you select the
Transparency
setting, the face-up output tray
is selected automatically for straight-through printing.
4. If you want to have a series of transparencies printed in sequence, select
the following Output option (if available):
• Reverse Order
If you load transparencies incorrectly, the printer stops and displays the
message
Check OHP Sheet
on the control panel. Check the paper tray
and the paper path to make sure transparencies are not jammed. Then
load the transparencies correctly and try printing again. See page 5-6 for
more information about clearing jams.
Printing on Envelopes
You can print on most envelopes, as long as they don’t have tape on the flap.
Always test envelopes in the printer before you purchase large quantities.
Print quality may be uneven on some envelopes because of their irregular
thickness.
The minimum size for envelopes is shown below:
Warning
Transparencies that have
just been printed may be
hot.
Caution
Do not use window
envelopes unless they
are specially designed for
laser printers. The plastic
on most window
envelopes will melt when
it comes in contact with
the fuser.
minimum
5.63 inches
(including flap)
minimum 3.5 inches