Epson 8000 Printer User Manual


 
1
Your EPSON ColorPage 8000 includes several consumable parts that need
to be replaced periodically. The control panel displays a message to alert you
when a toner cartridge or other part is nearly used up. This is the best time to
perform the replacement procedure. If you wait until the component is
completely used up, the printer will display an error message and stop
working until you replace the component.
This chapter covers the following procedures:
Replacing parts safely
Replacing a toner cartridge
Replacing the fuser oil roll
Replacing the photoconductor unit
Replacing the waste toner collector
Cleaning the paper path rollers
Cleaning the printer
Transporting the printer
Replacing Parts Safely
Make sure you follow these precautions when you perform the replacement
procedures described in this chapter:
Clear enough space around the printer so that you can work with the
cover open or the fuser unit pulled out.
Do not remove consumable parts from the printer unless they need to be
replaced.
Do not install partially used consumable parts in the printer.
Be sure to check the control panel display after you replace a consumable
part. You may see a message indicating that one of the other parts needs
replacing. The messages appear one at a time, even if several consumable
parts run out at the same time.
Chapter 4:
Maintaining
and
Transporting
the Printer
Warning
Follow local regulations
when you dispose of used
consumable parts. Do not
expose them to fire, as they
can explode and cause
injury.