Filter
Top Products
2-7
Monitoring the Printer | 2-7
Error Messages
When your toner runs out or a problem occurs, an error message appears on
the control panel display and the
On Line
light goes out. You need to correct
the problem before you can continue printing.
The following table lists the messages alphabetically, and includes an
explanation and instructions for correcting the problem. Page numbers show
where you can find additional information or instructions.
If the
Continue
light is flashing, the message is a warning, and you can press
the
Continue
button to print. Warning messages are listed on page 2-11.
^
Paper Source
Menu
RITech
Page Size
Item
Copies
Manual Feed
Value
MP Tray Size
Orientation
Enter
Out Bin
AltReset
ContinueForm FeedOn Line
Error
messages
appear here.
The On Line
light goes out.
Error messages
Message Explanation Response See
Check OHP
Sheet
Transparencies are loaded incorrectly, or
non-EPSON transparencies are in the
printer. To avoid damage, the printer
stops.
Clear any jammed sheets from the
multipurpose tray or paper path.
page 5-6
Exit Cover Open
The output path cover on the left side of
the printer is open.
Close the cover.
Exiting Paper
Jam
Paper is jammed in the output area. Clear the output path cover. page 5-12
Feed Jam
Paper is jammed in one of the feed
areas.
Check the following and clear
jammed paper if necessary:
standard cassette,
multipurpose tray, paper path,
large capacity paper unit.
page 5-4
page 5-6
page 5-13
Feeder Cover
Open
The feeder cover on the right side of the
large capacity paper unit is open.
Close the feeder cover.
Front Cover
Open
The printer’s front cover is open. Close the front cover.