Filter
Top Products
CONFIDENTIAL
Paper roll Print position commands ESC T
Ver. 10.01 p. 174
• If the starting position is the upper right or lower left of the print area:
These commands use horizontal motion units: ESC 3, ESC J, GS $, GS \
These commands use vertical motion units: ESC SP, ESC $, ESC \
■ The settings of this command are effective until ESC @ is executed, the printer is reset, or the power is
turned off.
[Model-dependent variations] None
Program Example for all printers Print Sample
PRINT #1, CHR$(&H1B);"L"; ← Select page mode
PRINT #1, CHR$(&H1D);"P";CHR$(180);CHR$(180);
PRINT #1, CHR$(&H1B);"W";CHR$(0);CHR$(0);CHR$(0);CHR$(0);
CHR$(240);CHR$(0);CHR$(200);CHR$(0); ← Set print area
PRINT #1, CHR$(&H1B);"T";CHR$(0); ← Select print direction
PRINT #1, "AAAAA"; CHR$(&HA);
PRINT #1, "BBBBB"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"T";CHR$(1); ← Select print direction
PRINT #1, "CCCCC"; CHR$(&HA);
PRINT #1, "DDDDD"; CHR$(&HA);
PRINT #1, CHR$(&H1B);"T";CHR$(2); ← Select print direction
PRINT #1, "EEEEE"; CHR$(&HC); ← Batch print and return to standard mode
AAAAA
BBBBB
CCCCC
DDDDD
EEEEE
Print area
ESC W
set by
←