Filter
Top Products
CONFIDENTIAL
Paper roll Bar code commands GS H
Ver. 10.01 p. 338
GS H
SETTING COMMAND
[Name] Select print position of HRI characters
[Format] ASCII GS H
n
Hex 1D 48
n
Decimal 29 72
n
[Range] 0 ≤
n
≤ 3
48 ≤
n
≤ 51
[Default]
n
= 0
[Printers not featuring this command] TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] Selects the print position of Human Readable Interpretation (HRI) characters when printing a bar code, using
n
as follows:
[Notes]
■ HRI characters are printed using the font specified by GS f.
■ This command setting is effective until performing of ESC @, reset or power-off.
n
Print position
0, 48 Not printed
1, 49 Above the bar code
2, 50 Below the bar code
3, 51 Both above and below the bar code
Bar code commands