Filter
Top Products
CONFIDENTIAL
Paper roll Line spacing commands ESC 2
Ver. 10.01 p. 96
When the maximum character height exceeds 30 dots in one line, printer feeds the paper amount
of height of the character when changing lines in the standard mode.
TM-T88III
The default line spacing is about 4.23 mm {1/6 inch}, which is equivalent to 30 dots.
When the maximum character height exceeds 30 dots in one line, the printer will feed the amount
of paper equal to the height of the character when changing lines in standard mode.
TM-L60II
The default line spacing is about 4.23 mm {1/6 inch}, which is equivalent to 30 dots.
When the maximum character height exceeds 30 dots in one line, the printer will feed the amount
of paper equal to the height of the character when changing lines in standard mode.
TM-L90
The default line spacing is about 3.75 mm (30/203 inch), which is equivalent to 30 dots.
When the maximum character height exceeds 30 dots in one line, the printer will feed the amount
of paper equal to the height of the character when changing lines in standard mode.
TM-U230
The default line spacing is about 4.23 mm {1/6 inch}, which is equivalent to 12 dots.
TM-U210, TM-U220
The default line spacing is about 4.23 mm {1/6 inch}, which is equivalent to 12 dots.
TM-U300A/B
The default line spacing is about 4.23 mm {1/6 inch}, which is equivalent to 12 dots.