Filter
Top Products
CONFIDENTIAL
Paper roll Status commands GS r
Ver. 10.01 p. 334
TM-J2000/J2100
■ Paper sensor status (
n
= 1, 49)
When the roll paper end sensor detects a paper-end, the printer goes offline and does not execute
this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end
status.
When the roll paper cover is open, paper detection (detected by the roll paper end sensor) may be
incorrect.
■ Ink status (
n
= 4, 52)
The function of bit 1 is not supported in TM-J2000 (Single color).
TM-T90
■ Paper sensor status (
n
= 1, 49)
When the roll paper end sensor detects a paper-end, the printer goes offline and does not execute
this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end
status.
When the roll paper cover is open, paper detection (detected by the roll paper end sensor) may be
incorrect.
TM-T88III
■ Paper sensor status (
n
= 1, 49)
When the roll paper end sensor detects a paper-end, the printer goes offline and does not execute
this command. Therefore, bits 2 and 3 of the paper sensor status do not transmit a paper-end
status.
When the roll paper cover is open, paper detection (detected by the roll paper end sensor) may be
incorrect.