Filter
Top Products
CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 545
■ Printing of symbol is not affected by print mode (emphasized, double-strike, underline, white/ black
reverse printing, or 90° clockwise-rotated), except for character size and upside-down print mode.
■ In standard mode, this command executes paper feeding for the amount needed for printing the symbol,
regardless of the paper feed amount set by the paper feed setting command. The print position returns to
the left side of the printable area after printing the symbol, and printer is in the status “beginning of the
line,” or “there is no data in the print buffer.”
■ In page mode, the printer stores the symbol data in the print buffer without executing actual printing. The
printer moves print position to the next dot of the last data of the symbol.
■ The quiet zone is not included in the printing data. Be sure to secure the quiet zone when using this
function.
[Model-dependent variations] TM-T90, TM-L90
TM-T90
This model does not support this function.
TM-L90
In standard mode, any symbol taller than 831 dots cannot be printed with this printer.
When printing MaxiCode symbol, the printer starts actual printing after it reaches control speed
for printing symbol. It is needed to feed paper amount of 10 dots or less in this operation. This
area is not included in the vertical area transmitted by Function 282.