Epson TM-T88III Printer User Manual


 
CONFIDENTIAL
Paper roll Customize commands FS g 1
Ver. 10.01 p. 551
FS g 1
SETTING COMMAND
[Name] Write to NV user memory
[Format] ASCII FS g 1
m a1 a2 a3 a4 nL
nH
d1...dk
Hex 1C 67 31
m a1 a2 a3 a4 nL
nH d1...dk
Decimal 28 103 49
m a1 a2 a3 a4 nL
nH d1...dk
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-L90 TM-L60II, TM-P60, TM-U230, TM-U220,
TM-U210, TM-U300A/B
[Range]
m
= 0
0 (
a1
+
a2
× 256) +
a3
× 65536) + (
a4
× 16777216) 1023)
1 (
nL
+
nH
× 256) 1024
32
d
255
k
= (
nL
+
nH
× 256)
[Description] Stores the data to NV user memory.
a1
,
a2
,
a3
, and
a4
specify the stored data starting address as (
a1
+
a2
× 256 +
a3
× 65536 +
a4
×
16777216).
nL
and
nH
specifies the number of stored data bytes (
nL
+
nH
× 256).
d
specifies the stored data.
k
indicates the number of stored data.
k
is an explanation parameter; therefore, it does not need to be
transmitted.
[Recommended Functions]
This is an unrecommended command. It is supported by some printer models but will not be supported by
future models.
GS ( C is recommended to write to NV user memory. Operation of GS ( C offers the following
improvements:
Data can be controlled by the record.
Each record can be redefined, retrieved, or deleted by keycode.
Memory can be used efficiently because the printer controls the data.
The amount of definition area remaining can be confirmed.
obsolete command
obsolete command