Filter
Top Products
CONFIDENTIAL
Paper roll Print position commands ESC \
Ver. 10.01 p. 179
ESC \
EXECUTING COMMAND
[Name] Set relative print position
[Format] ASCII ESC \
nL
nH
Hex 1B 5C
nL
nH
Decimal 27 92
nL
nH
[Range] –32768 ≤ (
nL
+
nH
× 256) ≤ 32767
[Default] None
[Printers not featuring this command] TM-U230, TM-U220, TM-U210, TM-U300A/B
[Description] Moves the print position to (
nL
+
nH
× 256) × (horizontal or vertical motion unit) from the current position.
[Notes]
■ The printer ignores any setting that exceeds the print area.
■ A positive number specifies movement to the right, and a negative number specifies movement to the left.
N pitch movement to the right: (
nL
+
nH
× 256) = N. Use the complement of N for setting N pitch
movement to the left: (
nL
+
nH
× 256) = 65536 – N.
■ When standard mode is selected, the horizontal motion unit is used.
■ When page mode is selected, the horizontal or vertical motion unit is used for the print direction set by
ESC T.
• When the starting position is set to the upper left or lower right of the print area using ESC T, the
horizontal motion unit is used.
• When the starting position is set to the upper right or lower left of the print area using ESC T, the
vertical motion unit is used.
■ Even if the vertical or horizontal motion unit is changed after changing the print position, the setting of
the print position will not be changed.
■ When underline mode is turned on, the underline will not be printed under the space skipped by this
command.
■ “\” corresponds to “\” in the JIS code system.
[Model-dependent variations] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90, TM-L60II
Print position commands