Filter
Top Products
CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 246
GS ( L pL pH m fn kc1 kc2 x y <Function 69>
[Name] Print the specified NV graphics data.
[Format] ASCII GS ( L
pL pH m fn kc1 kc2 x y
Hex 1D 28 4C 06 00 30 45
kc1 kc2 x y
Decimal 29 40 76 6 0 48 69
kc1 kc2 x y
[Range] (
pL
+
pH
× 256) = 6 (
pL
= 6,
pH
= 0)
m
= 48
fn
= 69
32 ≤
kc1
≤ 126
32 ≤
kc2
≤ 126
TM-L90, TM-T90,TM-P60, TM-J2000/J2100:
x
= 1, 2,
y
= 1, 2
[Description] Prints the NV graphics data defined by the key codes (
kc1
and
kc2
).
• Users have the option of specifying horizontal (times
x
) × vertical (times
y
) size settings for the selected
data.
[Notes]
■ This function is used to print NV graphics data defined using Functions 67 and 68 of this command.
■ The printer only prints when NV graphics data corresponding to the specified key code is present.
■ Use this function when the printer enters the “beginning of the line” or “no data in print buffer” state
during standard mode.
■ Note that during page mode, printing operations will not be performed simply because image data has
been stored to the print buffer.
■ NV graphics data that exceeds the print area for one line will not be printed.
■ The scales for width and height of graphics are specified by (
x
,
y
). Therefore, in page mode with 90° or
270° clockwise-rotated graphics, the printer applies print area and dot density from [
x
: direction of paper
feed,
y
: perpendicular to direction of paper feed].
■ Settings for text effect (bold, underline, orientation, etc. except for upside-down) and font size do not
affect the printing of the NV graphics data.
■ Feeds the paper the required distance when printing graphics data, regardless of line feed pitch settings
entered using the Set line feed command.