Filter
Top Products
CONFIDENTIAL
Paper roll Bit-image commands GS ( L GS 8 L
Ver. 10.01 p. 248
<TM-J2100 (two-color printing model)>
TM-T90
The dot density and the maximum print area are described in the next tables (dpi: number of dots per 25.4
mm).
“Vertical” is in the direction of paper feeding and “horizontal” is perpendicular (at right angles) to the
direction of paper feeding.
The maximum print area in the vertical direction is information used when graphics are printed with the page
mode selected (for the starting position specified with ESC T is “Upper right” or “Lower left”). In this case,
graphics rotated by 90 degrees or 270 degrees are printed.
See Function 5 of GS ( E for the paper width.
<Other than Japanese model>
Vertical Horizontal
Maximum print area (dot) Maximum print area (dot)
Scaling
Dot
density
Paper
width
82.5 mm
Paper
width
26 mm
Paper
width
69.5 mm
Paper
width
57.5 mm
Dot
density
Paper
width
82.5 mm
Paper
width
76 mm
Paper
width
69.5 mm
Paper
width
57.5 mm
× 1
180 dpi 512 480 432 360 180 dpi 640 680 760 912
× 2
90 dpi 256 240 216 180 90 dpi 320 340 380 456
Scaling
Vertical Horizontal
Dot density
Maximum print area (dot)
Dot density Maximum print area (dot)
Paper width
80 mm
Paper width
60 mm
Paper width
58 mm
×
1 180 dpi 512 384 360 180 dpi 831
×
2 90dpi 256 192 180 90 dpi 415