Filter
Top Products
CONFIDENTIAL
Paper roll Customize commands FS g 2
Ver. 10.01 p. 553
FS g 2
EXECUTING COMMAND
[Name] Read from NV user memory
[Format] ASCII FS g 2
m
a1
a2
a3
a4
nL
nH
Hex 1C 67 32
m
a1
a2
a3
a4
nL
nH
Decimal 28 103 50
m
a1
a2
a3
a4
nL
nH
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-L90, TM-L60II, TM-P60, TM-U230, TM-U220,
TM-U210, TM-U300A/B
[Range] TM-T88III:
m
= 0
0 ≤ (
a1
+
a2
× 256) ≤ 1023 (0 ≤
a1
≤ 255, 0 ≤
a2
≤ 3,
a3
= 0,
a4
= 0)
1 ≤ (
nL
+
nH
× 256) ≤ 80 (0 ≤
nL
≤ 80,
nH
= 0)
[Description] Transmits the data in NV user memory.
•
a1
,
a2
,
a3
, and
a4
specify the starting address of transmission data as
(
a1
+
a2
× 256 +
a3
× 65536 +
a4
× 16777216).
•
nL
and
nH
specify the amount of transmission data as (
nL
+
nH
× 256) bytes.
[Recommended Functions]
■ This is an unrecommended command. It is supported by some printer models but will not be supported by
future models.
■ GS ( C is recommended to write to NV user memory. Operation of GS ( C offers the following
improvements:
• Data can be controlled by record.
• Each record can be redefined, retrieved, or deleted by keycode.
• Memory can be used efficiently because the printer controls the data.
• Transmission data can be identified.
• The amount of definition area remaining can be confirmed.
[Notes]
■ NV user memory is the memory area used for storing character font data in non-volatile memory.
Customize commands
obsolete command
obsolete command