Filter
Top Products
CONFIDENTIAL
Paper roll Customize commands FS g 1
Ver. 10.01 p. 551
FS g 1
SETTING COMMAND
[Name] Write to NV user memory
[Format] ASCII FS g 1
m a1 a2 a3 a4 nL
nH
d1...dk
Hex 1C 67 31
m a1 a2 a3 a4 nL
nH d1...dk
Decimal 28 103 49
m a1 a2 a3 a4 nL
nH d1...dk
[Printers not featuring this command] TM-J2000/J2100, TM-T90, TM-L90 TM-L60II, TM-P60, TM-U230, TM-U220,
TM-U210, TM-U300A/B
[Range]
m
= 0
0 ≤ (
a1
+
a2
× 256) +
a3
× 65536) + (
a4
× 16777216) ≤ 1023)
1 ≤ (
nL
+
nH
× 256) ≤ 1024
32 ≤
d
≤ 255
k
= (
nL
+
nH
× 256)
[Description] Stores the data to NV user memory.
•
a1
,
a2
,
a3
, and
a4
specify the stored data starting address as (
a1
+
a2
× 256 +
a3
× 65536 +
a4
×
16777216).
•
nL
and
nH
specifies the number of stored data bytes (
nL
+
nH
× 256).
•
d
specifies the stored data.
•
k
indicates the number of stored data.
k
is an explanation parameter; therefore, it does not need to be
transmitted.
[Recommended Functions]
■ This is an unrecommended command. It is supported by some printer models but will not be supported by
future models.
■ GS ( C is recommended to write to NV user memory. Operation of GS ( C offers the following
improvements:
• Data can be controlled by the record.
• Each record can be redefined, retrieved, or deleted by keycode.
• Memory can be used efficiently because the printer controls the data.
• The amount of definition area remaining can be confirmed.
obsolete command
obsolete command