Filter
Top Products
CONFIDENTIAL
Paper roll Two-dimension code commands GS ( k
Ver. 10.01 p. 516
GS ( k <Function 065>
[Name] PDF417: Set the number of columns in the data region
[Format] ASCII GS ( k
pL pH cn fn n
Hex 1D 28 6B
03 00 30 41 n
Decimal 2940107
3 0 48 65 n
[Range] (
pL
+
pH
× 256) = 3 (
pL
=3,
pH
=0)
cn
= 48
fn
= 65
0 ≤
n
≤ 30
[Default]
n
= 0
[Description] Sets the number of columns in the data region for PDF417.
• When
n
= 0, specifies automatic processing
• When
n
is not 0, sets the number of columns in the data region to
n
codeword.
[Notes]
■ Settings of this function affect the processing of Functions 081 and 082.
■ When auto processing (
n
= 0) is specified, the maximum number of columns in the data area is 30 columns.
■ The following data is not included in the number of columns:
• Start pattern and stop pattern
• Indicator codeword of left and right
■ When automatic processing (
n
= 0) is specified, the number of columns is calculated by the print area when
processing Functions 081, 082, module width (Function 067), and option setting (Function 070).
■ Settings of this function are effective until ESC @ is executed, the printer is reset, or the power is turned
off.