Filter
Top Products
CONFIDENTIAL
Paper roll Kanji commands FS S
Ver. 10.01 p. 505
FS S
SETTING COMMAND
[Name] Set Kanji character spacing
[Format] ASCII FS S
n1 n2
Hex 1C 53
n1 n2
Decimal 28 83
n1 n2
[Printers not featuring this command] TM-L60II, TM-P60
[Range] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90: 0 ≤
n1
≤ 255, 0 ≤
n2
≤ 255
TM-U230, TM-U220, TM-U210, TM-U300A/B: 0 ≤
n1
≤ 32, 0 ≤
n2
≤ 32
[Default] TM-J2000/J2100, TM-T90, TM-T88III, TM-L90:
n1
= 0,
n2
= 0
TM-U230, TM-U220, TM-U210, TM-U300A/B:
n1
= 0,
n2
= 0
[Description] Sets left- and right-side spacing of the multi-byte code character
n1
and
n2
., respectively.
• Sets the left-side character spacing to [
n1
× horizontal or vertical motion units].
• Sets the right-side character spacing to [
n2
× horizontal or vertical motion units].
[Notes]
■ Settings of this command affect multilingual (except Thai) characters and user-defined characters.
■ When a character size is set to N times as large as a normal size, both right- and left-side character spacings
are also set to N times as large as a normal size.
■ In standard mode, the horizontal motion unit (perpendicular to the paper feed direction) is used.
■ In page mode, the horizontal or vertical motion unit differs, depending on the starting position set by
ESC T.
• When the starting position is set to the upper left or lower right, the horizontal motion unit
(perpendicular to the paper feed direction) is used.
• When the starting position is set to the upper right or lower left, the vertical motion unit (paper feed
direction) is used.
■ Different character spacing can be set for standard mode and page mode.
• When this command is set in standard mode, character spacing for multilingual (except Thai) characters
printed in standard mode is set.
• When this command is set in page mode, character spacing for multilingual (except Thai) characters
printed in page mode is set.
Kanji commands