Filter
Top Products
CONFIDENTIAL
Paper roll Customize commands GS ( E
Ver. 10.01 p. 617
• Sets the layout in the vertical direction by (
sb
) to (
sf
). (BM = black mark).
• The print starting position set by
sd
is top of the print area.
• The setting unit is 0.1 mm. The relationship between each setting value of the layout of the vertical
direction and paper layout is as follows.
• Sets the layout in the horizontal direction by
sg
to
sh.
(
sa
= 49)(
sa
= 64)
sb
Top of a BM ~ top of next BM. Bottom of a label ~ bottom of the next label.
sc
Top of a BM ~ bottom of BM. Bottom of a label ~ top of the next label.
sd
Top of a BM ~ print starting position. Bottom of a label ~ the print starting position.
se
Top of a BM ~ cutting position. Bottom of a label ~ cutting position.
sf
Print starting position ~ bottom of the print area. Print starting position ~ bottom of the print area.
(s
a
= 49)(s
a
= 64)
sg
Left of the paper ~ left of print area. Left of the paper ~ left of print area.
sh
Left of the print area ~ right of print area. Left of the print area ~ right of print area.