Filter
Top Products
Copying onto a CD/DVD 53
4. Press the
Copy mode button.
5. Press l or r to choose
Color or B&W.
6. Press d, then press l or r to select
Graphics, Photo, or Text.
7. Press d, then press l or r to select CD/DVD Copy for
the Layout.
8. If you want to adjust other settings, press the
x Print
Settings
button. See page 16 for more information.
Tip:
If you want to check the output before copying, select
Plain Paper as the Paper Type and load plain paper.
9. Press the x Start button to start copying.
Note:
If you need to cancel copying, press the y Stop/Clear Settings button.
After you print, handle the CD or DVD carefully. To allow the ink to dry fully, you
may need to wait up to 24 hours (depending on the disc) before playing the disc or
inserting it in a drive. Keep printed discs away from moisture and direct sunlight.
If ink smears on your printed CD/DVDs, you may need to adjust the ink density.
CD/DVDs from different manufacturers absorb ink differently, so you may need to
adjust the setting for each brand. After making basic print settings, press the
x Print Settings button. Change the Copy Density as needed, then press OK.
RX580.book Page 53 Thursday, July 27, 2006 4:04 PM