Filter
Top Products
Problems and Solutions 79
Problems and Solutions
Check the solutions below if you’re having trouble using your RX580.
Noise Problems
■ The first time you install ink cartridges, the printer must charge its print head
for about 2 minutes. Wait until charging finishes (when you see the message
“Initialization is complete”) before you turn off the RX580, or it may charge
improperly and use excess ink the next time you turn it on.
■ Turn off the RX580, then make sure the ink cartridges are inserted completely
and the ink cartridge cover is closed completely. Also make sure no packing
material remains inside. Wait a moment, then turn the RX580 back on.
Cannot recognize the device. Make sure you’ve inserted your memory
card correctly. If you connected a USB
storage device, make sure you’ve inserted
the disk correctly.
Cannot recognize the memory card
or disk.
Make sure you’ve inserted the memory card
or storage disk correctly. Check to see if
there is a problem with the card or disk.
A problem occurred while
formatting. Formatting cancelled.
Retry the procedure. If the error reoccurs,
there may be a problem with your memory
card or storage disk. Check the card or disk,
then try again.
An error occurred while saving. Save
cancelled.
Cannot create a folder on the
memory card or disk. Operation
cancelled.
Insert a new memory card or storage disk
and try again.
Print head cleaning failed. Try cleaning the print head again. If the error
message reoccurs, contact Epson as
described on page 82.
Backup Error
Error code
XXXXXXXX
A problem occurred and the backup was
cancelled. Make a note of the error code and
contact Epson as described on page 82.
Message Solution
RX580.book Page 79 Thursday, July 27, 2006 4:04 PM