Filter
Top Products
Basic Printing
1-4
8. If necessary, click the
Paper
tab and choose your paper size,
number of copies, orientation, and printable area. If your
software application lets you control these settings, you
don’t need to use the
Paper tab.
9. Click
OK when you’re finished checking your settings. The
dialog box closes.
10. In the printing dialog box, click
Close, OK, or Print. You
may need to click a combination of these buttons.
While your document is printing, the
EPSON Despooler
dialog box appears, showing the printing progress and the
status of your printer. If you’re using Windows 95, this box
also displays the Status Monitor. (See “Checking Printer
Status,” on page 1-6 for more information.)
Setting Default Printer Options
When you change printer settings through your software
application, the settings apply only to the application you’re
using. If you want to adjust the default settings for all your
Windows applications, you can access the dialog box through
the Windows 95 or Windows NT Settings option or the
Windows 3.1 Control Panel.
Make sure all your software applications are closed before you
start. Otherwise, you’ll have to close and then reopen them to
have the new default settings take effect.
Setting Default Options in Windows 95
Follow these steps:
1. Click
Start, point to Settings, and then select Printers.
2. Right-click the
EPSON Stylus COLOR 600 icon.
Note:
To cancel your changes
and exit the driver, click
the Cancel button at the
bottom of the menu at any
time.
Note:
Some application settings
override driver settings
(such as Paper Size or
Orientation), so it’s a good
idea to check the settings
in your application before
you print.
basic.fm5 Page 4 Thursday, July 24, 1997 2:59 PM