Filter
Top Products
Maintenance and Transportation
5-6
Installing the New Cartridge
Once you have removed the empty cartridge, you’re ready to
install the new one. Follow these steps:
1. Remove the new ink cartridge from its packaging.
2. Remove the yellow tape seal as shown:
3. Lower the ink cartridge into its holder with the label facing
up and the arrow pointing to the back of the printer. The
larger cartridge (color) goes on the right, the black ink
cartridge on the left.
4. Press down the ink cartridge clamp until it locks in place.
Caution:
You must remove the
yellow tape seal from the
top of the cartridge;
leaving the tape on will
permanently damage it.
Do not remove the clear
seal from the bottom of
the cartridge; ink will leak.
black cartridge
color cartridge
Caution:
Don’t open the clamp or
remove a cartridge
except to replace it with
a new one. Once you
remove a cartridge, you
can’t reuse it, even if it
contains ink.
maintran.fm5 Page 6 Thursday, July 24, 1997 3:08 PM