Filter
Top Products
Caution:
The short tear-off function cannot be used with the pull
tractor. Before you start printing with the pull tractor, be sure that the
HIT0
TEfiR
DFF
option in SelecType is off.
1. Turn on the printer. Then press the PAPER
the TRACTOR
light comes on.
SELECT
button until
2.
Load continuous paper in the push tractor as described in steps 2-7
in the section on loading continuous paper in Chapter 2, with one
exception. In step 2, position the left sprocket unit about 1/4 of an
inch from the left before locking it in place.
Using Printer Options
7-25