Filter
Top Products
CONDENSED:
Press this button to select either condensed
or normal printing. The selected mode is
displayed. In condensed mode, all
characters are printed at approximately
60% of their normal width. This mode
cannot be combined with 15 CPI (set by the
PITCH
button).
MICRO FEED:
PLATEN GAP ADJUST:
Turns on and off the micro-adjustment
feature. In micro-feed mode, the
LINE FEED
(V)
button is used to feed
the
paper slightly
backward and #he
FORM FEED
(A) button is
used to feed the paper slightly forward to
adjust the print position, short tear-off
position, or loading position. The sections
on short tear-off and adjusting the loading
position in this chapter have more
information on this feature.
Selects or deselects the platen gap adjust
mode. If the printing is too dark or too
faint, you can widen or narrow the platen
gap to achieve the desired printing results.
When this mode is selected, the display
changes to:
GhP
. . . .
..DDDDD.
Press the
ON LINE
(4
)
button to widen the
gap between the platen and print head.
Press the
LOAD/EJECT
(
b)
button to narrow
the gap. An increasing number of
)
‘s
indicates a narrowing gap.
3-6
Using the Printer