Filter
Top Products
9. Press the
4
button again.
The display changes to:
SFORfl
LNG
Tractor,
10.
Press the
4
button once more.
These two screens are alternately displayed:
SFlUEMACRO
.
#nt
4
4FlBORT
SF1UEb
11.
Press the
A
or
V
button to select the number of the macro to be
saved (1-4).
12.
Press the
b
button to save the macro. (If you do
not
wish to save
your changes to a macro, press the
4
button.)
If you saved
the
macro, the display briefly shows:
MCR@#nSFIUED
The display then changes to:
I:
CHf+NGEMi9CRO
.I
You are now back at the SelecType main menu.
13. If you wish to exit the SelecType mode, press the
SelecType
button.
Skip Over Perforation
By adjusting the SelecType
1”
SKIP
option, you can set skip over
perforation to
ON
or
OFF.
If this feature is
on
when you use continuous
paper, a one-inch margin is provided between
the
last printed line on one
page and the initial printable line on the next page so that the printer
skips over the perforation. This feature is very convenient if your
application program does not provide top and bottom margins.
3-28
Using the Printer