Filter
Top Products
PLATEN GAP ADJUST :
On when platen gap adjust mode is
(orange)
selected.
SelecType
(orange):
On when
SelecType
mode is selected.
4
A
V
b
(yellow):
These arrows prompt the user when
SelecType mode, tear-off mode, micro-feed
mode, or platen gap adjust mode is
selected.
The buttons
ON LINE FORM FEED LINE
FEED
LOAOIEJECT
ON LINE:
FORM FEED:
This button controls the printer’s on line/
off line status. When the printer is on line,
the
ON LINE
light
on
the left side of the
control panel is on and the printer can
receive and print data from the computer.
In SelecType mode, this button may be
used to change the SelecType settings.
When the printer is off line, this button
ejects a single sheet of paper or advances
continuous paper to the top of the next
page. In SelecType mode, this button
changes the SelecType settings.
3-4
Using the Printer