Filter
Top Products
2.
Press the
FORM FEED
button to feed
the
paper forward. Then tear it
off at the perforation.
Note:
If the perforation of
the
paper is not fed past
the
edge
of
the
paper guide
the
first time, press
the FORM FEED
button again. Do not
use
the
platen knob to feed the paper.
Reversing the paper to the standby position
After you have tom off the last page of printed paper, if you wish to
reverse-feed
the
paper remaining in the printer to the standby position,
follow the steps below.
When continuous paper is in the standby position, the holes at
the
top of
the first sheet stay fitted over the pins of the sprocket unit. When the
paper is in this position, you
can
switch to single sheet paper (see the
instructions in this chapter), reload
the
continuous paper, or remove the
continuous paper.
2-14
Paper Handling