Filter
Top Products
First, make sure
that
the
TEAR OFF
light is on, and then press the
MICRO
FEED
button. The display shows
TEf!R
OFF
f3DJUST.
Next, adjust the
tear-off position in
1080th
of an inch increments by pressing
the FORM
FEED
button
(A)
to feed the paper forward or the
LINE FEED
button
(V)
to feed it backward. After setting the position, press the
MICRO FEED
button again.
TEAR
OFF
c
I
Caution:
The short tear-off feature can only be used with the built-in
tractor feeding system.
Once you use the micro-adjustment feature to set the tear-off position,
the printer remembers that position even after it is turned off.
Selecting Typestyles
Your printer can produce a wide range of typestyles by using different
fonts, pitches, widths, and other print variations. You can select
typestyles in three different ways: by using software commands, by using
SelecType,
or by using other features available on the control panel. This
section describes how to select a typestyle using the
FONT, PITCH,
and
CONDENSED
buttons
on the
control panel.
Using the Printer
3-33