Filter
Top Products
Note: Your application
may
override your Selectype settings. Some
application programs are designed to control the same settings you
choose with SelecType by sending certain software commands before
printing. Because these commands cancel SelecType settings, you
should use
the
program instead of SelecType to select the affected
setting.
You can exit SelecType at any time by pressing this button
once
more.
Note that you must exit SelecType before printing a document. If you
press the
SelecType
button after you set a macro but before you save it,
those settings are temporarily used as current settings until the printer is
turned off, but are cleared when the printer is turned back on.
The SelecType main menu lists the five modes that let you control
printer functions and operations. The five main menu modes are:
:LrJflDMfKRO:
:CHflNGEl'MCRO:
:CHBNGEDEFAlJLTS
:PRINTOUT
SETTINGS:
:CLEflRALL
t'lC1CRDS:
This mode lets you load one of the four
macros to accommodate your own printing
needs.
This mode lets you change the current printer
settings (such as font and form length), with
the option of saving these changes to create
your own macros.
This mode lets you define
the
default settings
(such as interface and baud rate) that will be in
effect each time you turn on the printer.
This mode prints out the current printer
settings, the settings for the four macros, and
the default settings.
This mode returns all of the current printer
settings, macro settings, and default settings to
the preset values.
Using the Printer
3-11